To Next PageTo Next PageWhat to do if Omron M6 Comfort Blood Pressure Monitor shows error E5/E6?
If the Omron Blood Pressure Monitor displays an error message (E5/E6) repeatedly due to the influence of an irregular heartbeat, it is recommended that you consult with your physician.
What to do if Omron M6 Comfort detects irregular heartbeats?
If the Omron Blood Pressure Monitor detects irregular heartbeats, remove the arm cuff, wait 2-3 minutes, and take another measurement. If the error persists, it is recommended to contact your physician.
What to do if Omron M6 Comfort shows error due to movement and insufficient inflation?
If the Omron Blood Pressure Monitor displays an error due to movement during measurement and insufficient inflation, repeat the measurement while remaining still and avoiding talking. If 'E2' appears repeatedly, manually inflate the arm cuff to 30-40 mmHg above your previous reading.
What to do if Omron Blood Pressure Monitor air plug is disconnected?
If the air plug of your Omron Blood Pressure Monitor is disconnected, securely insert it.
What to do if Omron Blood Pressure Monitor arm cuff is leaking air?
If air is leaking from the arm cuff of your Omron Blood Pressure Monitor, replace it with a new one.
Why does the Omron M6 Comfort arm cuff pressure not rise?
If the arm cuff pressure on your Omron Blood Pressure Monitor isn't rising, the air connector might not be securely connected into the air jack; make sure the air tube is connected securely. Alternatively, air could be leaking from the arm cuff, in which case you should replace the arm cuff with a new one.
What to do if nothing happens when I press the buttons on my Omron M6 Comfort Blood Pressure Monitor?
If nothing happens when you press the buttons on your Omron Blood Pressure Monitor, it could be due to a couple of reasons. The batteries might be empty, so replace them with new ones. Another possibility is that the batteries have been inserted incorrectly, so ensure they are inserted with the correct (+/-) polarity.
Why are my Omron M6 Comfort readings too high?
High readings may occur if the cuff isn't wrapped firmly around your arm, so ensure the arm cuff is attached correctly. Another cause can be that the air plug is not properly connected to the monitor. Make sure that you push the air plug firmly into the air jack.
What to do if the Afib symbol appears on my Omron Blood Pressure Monitor?
If the “ ” symbol appears on your Omron Blood Pressure Monitor, it is recommended to consult with your physician because there is a possibility of Afib or other heart arrhythmias.
What to do if Omron Blood Pressure Monitor arm cuff was inflated above 299 mmHg?
If your Omron Blood Pressure Monitor displays an error because the arm cuff was inflated above 299 mmHg manually, avoid inflating the arm cuff above this limit during manual inflation.
General| Type | Automatic |
|---|---|
| Cuff size | 22 - 42 cm |
| Display type | LCD |
| Memory slots | 200 |
| Date imprinting | Yes |
| Number of users | 2 user(s) |
| Speaking function | - |
| Placement supported | Upper arm |
| Battery type | AA |
| Number of batteries supported | 4 |
| Quantity per pack | 1 pc(s) |
