Omron MIT Elite User Manual

22
3.Using the Unit
Using the Guest Mode
The monitor stores measurement values for one user in the memory.
The guest mode can be used to take a single measurement for another
user.
No measurement values are stored in the memory when the guest
mode is selected.
1. Press and hold the O/I START button for 3 seconds.
The Guest symbol ( ) appears on
the display.
2. Release the O/I START button.
The cuff starts to inflate automatically.
Note: To stop the inflation, press the O/I START button. The
monitor will stop inflating, start deflating and turn off.
3. Inflation stops and the measurement is started. When the
measurement is completed, your blood pressure and pulse rate
appear on the display.

Omron MIT Elite Specifications

General

Type	Automatic
Cuff size	22 - 32 cm
Display type	LCD
Memory slots	90
Date imprinting	Yes
Speaking function	-
Placement supported	Upper arm
Battery type	AA
Number of batteries supported	4
Quantity per pack	1 pc(s)