Omron MX3 Plus - Preparation for Measurement; Battery Installation; Cuff Connection; Cuff Fitting

3
MX3 Plus English
Insert batteries
1 Slide off the battery cover. 2 Insert four batteries as indicated in the
battery compartment and close
compartment
Caution! Use four identical 1.5V
alkaline batteries type AA LR6!
PULSE/min
SYS
mmHg
DIA
mmHg
M
MX3 Pl
Connect cuff
1 Insert air plug in air jacket.
L
G
Fit cuff
Caution! Do not inflate the cuff when not
wrapped around the arm!
1 Bare your arm.
Caution! Push up your sleeve: avoid
constricting the blood flow!G Air tube
L Ring
3 Preparation
2 Pass the end of the cuff through the ring.
Caution! Keep the air tube on the
outside!
3 Put your arm through the loop.
Note:keep the tube even with your
middle finger.
1-2 cm