4 System Program
4 - 18
NA-series Programmable Terminal Hardware(-V1) User’s Manual (V125)
Starting from a User Screen
The required settings must be made from the Sysmac Studio.
The following example shows how to execute the Troubleshooter by using an object event.
In this example, settings are performed to execute the Troubleshooter when a Button object is
clicked.
1 Place a Button object on the screen and display Events and Actions.
2 Select Click as the event.
3 Select ShowTroubleshooter as the action.
4 Specify the name of the Controller to be connected in ControllerName.
5 Specify the name of the page to be displayed while the Troubleshooter is running in StartPage.
To Next Page
Loading...
