4 System Program
4 - 16
NA-series Programmable Terminal Hardware(-V1) User’s Manual (V125)
When Connected to an NX-series Communication Control Unit
System configuration element
Troubleshooter functions
Displaying
errors
Clearing
errors
Displaying
error logs
Clearing error
logs
Communication Control Unit Applicable
NX Units Partially appli-
cable
*1
*1. Events are not displayed for some NX Units.
Applicable
*2*3
*2. Errors that occur on a specific NX Unit cannot be cleared separately.
*3. It might be necessary to reset errors in Safety Control Units with a safety program. Refer to the NX-series Safe-
ty Control Unit/Communication Control Unit User’s Manual (Cat. No. Z395) for details on resetting errors in
Safety Control Units.
Applicable
Applicable
*4
*4. Event logs for individual units cannot be cleared.
To Next Page
Loading...
