16
EN
Important
Information
Know Your Unit
Operating
Instructions
Care and
Maintenance
Technical Data,
Warranty, etc.
Maintenance
Maintaining the product’s parts
Warning
When assembling the product, do not directly touch
parts through which the medication or aerosol will
pass.
Do not touch the vibrator while the product is
plugged in.
1
Turn off the power button and
disconnect the power cord
from both the main unit and
the outlet.
2
Disconnect the inhalation hose,
mouthpiece, and other
accessories from the main unit.
3
Remove the removable water
tank from the main unit.
4
Remove the nebulization set
from the removable water tank
and disassemble it.
5
Dispose of any remaining
medication as well as any
water remaining in the
removable water tank.
6
Remove the handle cover from
the removable water tank.
Note: If you clean and disinfect the removable
water tank with the handle cover
attached, the part will not dry completely,
leading to bacterial growth.
Handle cover
7
Disinfect each part.
Dry parts immediately after disinfecting
them. For more information about how to
disinfect parts, see the “Disinfecting parts”
section. (
Page 19)
To Next Page
Loading...
