Omron NJ Series Troubleshooting Manual

3 Error Tables
3-96
NJ-series Troubleshooting Manual (W503)
64F70000 hex Unit Over
Range for
Channel 8
The analog input
data for input chan-
nel 8 exceeded the
upper limit of the
input range. Or, the
analog output data
for output channel 8
exceeded the upper
limit of the output
range.
• The analog input data
exceeded the upper limit of the
input range. Or, the analog out-
put data exceeded the upper
limit of the output range.
US NX-series
Analog I/O
Units User’s
Manual
(W522)
64F80000 hex Unit Under
Range for
Channel 1
The analog input
data for input chan-
nel 1 went below
the lower limit of the
input range. Or, the
analog output data
for output channel 1
went below the
lower limit of the
output range.
• The analog input data went
below the lower limit of the input
range. Or, the analog output
data went below the lower limit
of the output range.
US Same as
above.
64F90000 hex Unit Under
Range for
Channel 2
The analog input
data for input chan-
nel 2 went below
the lower limit of the
input range. Or, the
analog output data
for output channel 2
went below the
lower limit of the
output range.
• The analog input data went
below the lower limit of the input
range. Or, the analog output
data went below the lower limit
of the output range.
US Same as
above.
64FA0000 hex Unit Under
Range for
Channel 3
The analog input
data for input chan-
nel 3 went below
the lower limit of the
input range. Or, the
analog output data
for output channel 3
went below the
lower limit of the
output range.
• The analog input data went
below the lower limit of the input
range. Or, the analog output
data went below the lower limit
of the output range.
US Same as
above.
64FB0000 hex Unit Under
Range for
Channel 4
The analog input
data for input chan-
nel 4 went below
the lower limit of the
input range. Or, the
analog output data
for output channel 4
went below the
lower limit of the
output range.
• The analog input data went
below the lower limit of the input
range. Or, the analog output
data went below the lower limit
of the output range.
US Same as
above.
64FC0000 hex Unit Under
Range for
Channel 5
The analog input
data for input chan-
nel 5 went below
the lower limit of the
input range. Or, the
analog output data
for output channel 5
went below the
lower limit of the
output range.
• The analog input data went
below the lower limit of the input
range. Or, the analog output
data went below the lower limit
of t
he output range
.
US Same as
above.
Event code Event name Meaning Assumed cause
Level
Reference
Maj Prt Min Obs Info

Omron NJ Series Specifications

General

Program Capacity	Up to 128 MB
SD Card Slot	Yes
Power Supply Voltage	24 VDC
Motion Control	Yes
USB Ports	1
Operating Temperature	0°C to 55°C
Communication Interfaces	Ethernet/IP, EtherCAT, USB
Safety Function	Optional
Storage Temperature	-20°C to 75°C
Communication Ports	USB
Dimensions	Varies by model
Weight	Varies by model