Omron NJ Series - Page 220

3 Error Tables
3-158
NJ-series Troubleshooting Manual (W503)
350A0000 hex* RxPDO Mapping Error NX-series EtherCAT Coupler Unit W519
350B0000 hex* Illegal State Transition Request
Received
NX-series EtherCAT Coupler Unit W519
350C0000 hex* Error State Transition Received NX-series EtherCAT Coupler Unit W519
350D0000 hex* Synchronization Cycle Setting Error NX-series EtherCAT Coupler Unit W519
350E0000 hex* NX Bus Cycle Delay Detected NX-series EtherCAT Coupler Unit W519
35100000 hex* External Input Setting Error NX-series Position Interface Units W524
35110000 hex* SSI Data Setting Error NX-series Position Interface Units W524
35200000 hex* Safety Process Data Communica-
tions Not Established Error
NX-series Safety Control Unit Z930
35210000 hex* Safety Process Data Communica-
tions Not Established - Incorrect Unit
Parameter Error
NX-series Safety Control Unit Z930
35230000 hex* Safety Process Data Communica-
tions Not Established, Incorrect FSoE
Slave Address Error
NX-series Safety Control Unit Z930
35240000 hex* Safety Process Data Communica-
tions Not Established, Incorrect
Frame Error
NX-series Safety Control Unit Z930
35300000hex* DB Connection Setting Error DB Connection Service W527
38010000 hex Scaling Data Setting Error/Ratio Con-
version Use Setting Error
CJ-series Analog I/O Units W490
38020000 hex Ratio Set Value Error CJ-series Analog I/O Units W490
381C0000 hex Status Area Layout Setting Error CJ-series EtherNet/IP Units W495
383C0000 hex Overload Warning Servo G5 and G5 Linear I576, I577
383D0000 hex Excessive Regeneration Warning Servo G5 and G5 Linear I576, I577
383E0000 hex Vibration Detection Warning Servo G5 and G5 Linear I576, I577
383F0000 hex Excessive Hybrid Following Error Servo G5 I576
38400000 hex Overspeed 2 Servo G5 and G5 Linear I576, I577
38410000 hex Command Error Servo G5 and G5 Linear I576, I577
38420000 hex Command Generation Error Servo G5 and G5 Linear I576, I577
38430000 hex Error Counter Overflow 1 Servo G5 and G5 Linear I576, I577
38440000 hex Error Counter Overflow 2 Servo G5 and G5 Linear I576, I577
38450000 hex Interface Input Duplicate Allocation
Error 1
Servo G5 and G5 Linear I576, I577
38460000 hex Interface Input Duplicate Allocation
Error 2
Servo G5 and G5 Linear I576, I577
38470000 hex Interface Input Function Number
Error 1
Servo G5 and G5 Linear I576, I577
38480000 hex Interface Input Function Number
Error 2
Servo G5 and G5 Linear I576, I577
38490000 hex Interface Output Function Number
Error 1
Servo G5 and G5 Linear I576, I577
Event code Event name Functional classification Reference