Omron NJ Series Troubleshooting Manual

3 Error Tables
3-172
NJ-series Troubleshooting Manual (W503)
57250000 hex* Switch Structure Last ON Position
Setting Out of Range
Motion Control Instructions W508
57260000 hex* Switch Structure Axis Direction Out of
Range
Motion Control Instructions W508
57270000 hex* Switch Structure Cam Switch Mode
Out of Range
Motion Control Instructions W508
57280000 hex* Switch Structure Duration Setting Out
of Range
Motion Control Instructions W508
57290000 hex* Track Option Structure ON Compen-
sation Setting Out of Range
Motion Control Instructions W508
572A0000 hex* Track Option Structure OFF Compen-
sation Setting Out of Range
Motion Control Instructions W508
572B0000 hex* Number of Array Elements in Switch
Structure Variable Out of Range
Motion Control Instructions W508
572C0000 hex* Number of Array Elements in Output
Signal Structure Variable Out of
Range
Motion Control Instructions W508
572D0000 hex* Number of Array Elements in Track
Option Structure Variable Out of
Range
Motion Control Instructions W508
572E0000 hex* Numbers of Elements in Output Sig-
nals and Track Option Arrays Not
Matched
Motion Control Instructions W508
572F0000 hex* Motion Control Instruction Multi-exe-
cution Disabled (Master Axis)
Motion Control Instructions W508
57300000 hex* Motion Control Instruction Multi-exe-
cution Disabled (Position Type Selec-
tion)
Motion Control Instructions W508
57310000 hex* Same Track Number Setting in Switch
Structure Out of Range
Motion Control Instructions W508
58210000 hex* Output Control Timeout for Parallel
I/O, PLC Link, or EtherNet/IP
FH/FZ5 Series Vision System Z342
58220000 hex* Output Control Timeout for EtherCAT FH/FZ5 Series Vision System Z342
60010000 hex Task Period Exceeded Errors Related to Tasks W501
60020000 hex Task Execution Timeout Errors Related to Tasks W501
60030000 hex I/O Refreshing Timeout Error Errors Related to Tasks W501
60040000 hex Insufficient System Service Time
Error
Errors Related to Tasks W501
60050000 hex Task Period Exceeded Errors Related to Tasks W501
64010000 hex Impossible to Access Special Unit Errors Related to Unit Configuration W500
64200000 hex Emergency Message Detected Built-in EtherCAT Master in CPU Unit W505
64400000 hex Target Position Positive Software
Limit Exceeded
Motion Control Instructions W508
64410000 hex Target Position Negative Software
Limit Exceeded
Motion Control Instructions W508
64420000 hex Command Position Overflow/Under-
flow
Motion Control Instructions W508
64430000 hex Positive Limit Input Motion Control Instructions W508
64440000 hex Negative Limit Input Motion Control Instructions W508
64450000 hex Positive Software Limit Exceeded General Motion Control W507
64460000 hex Negative Software Limit Exceeded General Motion Control W507
64470000 hex In-position Check Time Exceeded General Motion Control W507
Event code Event name Functional classification Reference

Omron NJ Series Specifications

General

Program Capacity	Up to 128 MB
SD Card Slot	Yes
Power Supply Voltage	24 VDC
Motion Control	Yes
USB Ports	1
Operating Temperature	0°C to 55°C
Communication Interfaces	Ethernet/IP, EtherCAT, USB
Safety Function	Optional
Storage Temperature	-20°C to 75°C
Communication Ports	USB
Dimensions	Varies by model
Weight	Varies by model