3 Error Tables
3-10
NJ-series Troubleshooting Manual (W503)
10260000 hex Trace Setting
Transfer Fail-
ure
The power supply
was interrupted
while transferring
the trace settings.
• The power supply was inter-
rupted while transferring the
trace settings.
S NJ-series
CPU Unit
Hardware
User’s Manual
(Cat. No.
W500)
NJ-series
CPU Unit Soft-
ware User’s
Manual (Cat.
No. W501)
10290000 hex
(Ver. 1.03)
Backup
Failed to
Start
An error was
detected in pre-exe-
cution checks for a
backup operation.
• An SD Memory Card is not
inserted.
• The SD Memory Card type is
not correct.
• The format of the SD Memory
Card is not correct.
• The SD Memory Card is write
protected.
• The Prohibiting backing up data
to the SD Memory Card param-
eter is set to prohibit backing up
data to an SD Memory Card.
• Another backup operation is in
progress.
• Synchronization, online edit-
ing, or the Clear All Memory
operation is in progress.
• The backup was canceled by
the user.
• The online connection with the
Sysmac Studio was discon-
nected.
• The SD Memory Card is dam-
aged.
S Same as
above.
102A0000 hex
(Ver. 1.03)
Backup
Failed
The backup opera-
tion ended in an
error.
• The capacity of the SD Memory
Card is insufficient.
• It was not possible to save the
data that was specified for
backup.
• The SD Memory Card was
removed during a backup oper-
ation.
• Failed to back up Unit or slave.
• The backup was canceled by
the user.
• Execution of the Save Cam
Table instruction or changing
the CPU Unit name is in prog-
ress.
• The online connection with the
Sysmac Studio was discon-
nected.
• It was not possible to save the
data that was specified for
backup to the computer.
•
The SD Memory Card is dam-
age
d.
S Same as
abo
ve.
Event code Event name Meaning Assumed cause
Level
Reference
Maj Prt Min Obs Info
To Next Page
Loading...
Need help?
General
