Omron NJ Series Quick Start Guide

9
5) Go to the ESI Library, the
added file will appear in
the ESI Library.
(In this example,
Parker_EtherCAT_PDrive)
2.
Add the device to the EtherCAT
Network by dragging it from the
Toolbox.
3.
Click the PDO map of the 3
rd
Party
device. Check that the
Controlword, Target Position,
Statusword, and Position actual
value are included in the PDO
map.

Omron NJ Series Specifications

General

Program Capacity	Up to 128 MB
SD Card Slot	Yes
Power Supply Voltage	24 VDC
Motion Control	Yes
USB Ports	1
Operating Temperature	0°C to 55°C
Communication Interfaces	Ethernet/IP, EtherCAT, USB
Safety Function	Optional
Storage Temperature	-20°C to 75°C
Communication Ports	USB
Dimensions	Varies by model
Weight	Varies by model