Omron NJ501-1320 - Page 391

A-107
Appendices
NJ-series CPU Unit Hardware User’s Manual (W500)
A-7 Version Information
A
A-7-3 Functions That Were Added or Changed for Each Unit Version
*1 This addition applies only to an NJ301- CPU Unit. The NJ501- and NJ101- CPU Units
support packet monitoring with all versions.
Note Refer to the manuals for the function modules for additions and changes to function module functions for
each unit version of the CPU Units.
Communica-
tions
EtherNet/
IP port
TCP/IP
applications
FTP client Addition 1.08 1.09 NJ/NX-series CPU
Unit Built-in Ether-
Net/IP Port User’s
Manual (Cat. No.
W506)
EtherCAT port
Packet monitoring
*1
(NJ301-)
Addition 1.10 1.12 NJ/NX-series CPU
Unit Built-in Ether-
CAT Port User’s Man-
ual (Cat. No. W505)
Communications instructions Change 1.08
1.11
1.09
1.15
NJ/NX
-series Instruc-
tions Reference Man-
ual (Cat. No. W502)
Debugging
function
Differential monitoring Addition 1.03 1.04 NJ/NX-series CPU
Unit Software User’s
Manual (Cat. No.
W501)
Reliability
functions
Self diagnosis Controller
errors
Changing lev-
els
Addition 1.03 1.04
Security Asset protec-
tion and pre-
venting
incorrect oper-
ation
Protection Data protec-
tion
Addition 1.01 1.02
Operation
authority verifi-
cation
Number of
groups
Change 1.01 1.02
SD Memory
Cards
Application Automatic transfer from SD
Memory Card
Addition 1.03 1.04
Program transfer from SD Mem-
ory Card
Addition 1.11 1.15
Backing up
data
SD Memory
Card backups
Operating
methods
CPU Unit
front-panel
DIP switch
Addition 1.03 1.04 NJ/NX-series CPU
Unit Software User’s
Manual (Cat. No.
W501)
Specification
with system-
defined vari-
ables
Addition 1.03 1.04
SD Memory
Card Window
in Sysmac Stu-
dio
Addition 1.03 1.04
Special
instruction
Addition 1.08 1.09
Protection Disabling
backups to SD
Memory Cards
Addition 1.03 1.04
Sysmac Studio Controller backups Addition 1.03 1.04
Function
Addition/
change
Unit
version
Sysmac
Studio
version
Reference