Omron NX Series Quick Start Guide

9
NX-SL/SI/SO
Version Information
The combinations that can be used of the unit versions of the Safety Control Units,
NJ-series CPU Units, and NX-series EtherCAT Coupler Unit, and the version of the
Sysmac Studio
* For the NX-ECC202, there is no unit version of 1.1 or earlier.
NX Unit Corresponding unit versions/version
Model number
Unit
version
EtherCAT Coupler Unit
NX-ECC201/EC202 *
NJ-series CPU Units
(NJ501-@@@@)
(NJ301-@@@@)
Sysmac Studio
NX-SL3300
1.0 or later 1.1 or later 1.06 or later 1.07 or later
NX-SIH400
NX-SID800
NX-SOD400
NX-SOH200
NX-SL3500 1.0 1.2 or later 1.07 or later 1.08 or later

Omron NX Series Specifications

General

Programming Languages	Ladder, Structured Text, Function Block Diagram, Sequential Function Chart
Communication Ports	Ethernet, USB, RS-232C, RS-485
Memory Capacity	Varies by model
Program Memory	Varies by model
Data Memory	Varies by model
Operating Temperature	0°C to 55°C
Power Supply	24 VDC
Ethernet Ports	1 or 2 ports (depending on model)
USB Ports	1 or 2 ports (depending on model)
Dimensions	Varies by model
Weight	Varies by model