Omron NX102 series Network Connection Guide

7．IO-Link Connection Procedure
24
Additional Information
The device variables are automatically named from a combination of the device names and
the port names.
For slave units, the default device names are "E" followed by a serial number starting from
"001". For NX Units, the default device names are "N" followed by a serial number starting
from "1".
Additional Information
In this guide, device variables are automatically named for each unit (each slave).
They can also be manually named for each port.

Omron NX102 series Specifications

General

Brand	Omron
Model	NX102 series
Category	Controller
Language	English