Omron NX102 series Network Connection Guide

5．Applicable Devices and Device Configuration
5
5. Applicable Devices and Device Configuration
5.1. Applicable Devices
The applicable devices are as follows:
Manufacturer Name Model
OMRON NJ/NX-series CPU Unit NX701-□□□□
NX102-□□□□
NX1P2-□□□□
NJ501-□□□□
NJ301-□□□□
NJ101-□□□□
OMRON NX-series
EtherCAT Coupler Unit
NX-ECC20□
OMRON NX-series
IO-Link Master Unit
NX-ILM□□□
PATLITE Signal Tower LR6-IL LR6-□IL□□□-□
Precautions for Correct Use
In this guide, the devices with models and versions listed in 5.2. Device Configuration are
used as examples of applicable devices to describe the procedures for connecting the
devices and checking their connection.
You cannot use devices with versions lower than those listed in 5.2.
To use the above devices with models not listed in 5.2. or versions higher than those listed in
5.2., check the differences in the specifications by referring to the manuals before operating
the devices.
Additional Information
This guide describes the procedures for establishing the network connection.
It does not provide information on operation, installation, wiring method, device functionality,
or device operation, which is not related to the connection procedures.
Refer to the manuals or contact the manufacturers.

Omron NX102 series Specifications

General

Brand	Omron
Model	NX102 series
Category	Controller
Language	English