Omron NX502-1 Series Manual

Machine Automation Controller NX1
3
Ordering Information
Applicable standards
Refer to the OMRON website (www.ia.omron.com) or ask your OMRON representative for the most recent applicable standards for each model.
NX-series NX102 CPU Units
Note: 1. One NX-END02 End Cover is provided with the NX102-@@@@, and the HMC-SD291 Memory Card is provided with the NX102-@@20.
2. The battery is not mounted when the product is shipped. Refer to the Battery for details.
NX Units
Digital Input Units
Product name
Specifications
Model
Program
capacity
Memory capacity for variables
Maximum number of used real axes
Motion
control axes
Single-axis
position
control axes
NX102
CPU Unit
5 MB
1.5 MB (Retained during power inter-
ruption)/32 MB (Not retained during
power interruption)
12 8 4 NX102-1200
844NX102-1100
624NX102-1000
404NX102-9000
NX102
Database Connection CPU Unit
12 8 4 NX102-1220
844NX102-1120
624NX102-1020
404NX102-9020
Product Name
Specifications
Model
Number of
points
Internal I/O
common
Rated input
voltage
I/O refreshing method ON/OFF response time
DC Input Unit
(Screwless
Clamping Terminal
Block, 12 mm
Width)
4 points
NPN
12 to 24 VDC
Switching Synchronous I/O refreshing and
Free-Run refreshing
20 μs max./400 μs max. NX-ID3317
24 VDC 100 ns max./100 ns max.
NX-ID3343
Input refreshing with input changed time
only *
1
NX-ID3344
PNP
12 to 24 VDC
Switching Synchronous I/O refreshing and
Free-Run refreshing
20 μs max./400 μs max. NX-ID3417
24 VDC
100 ns max./100 ns max.
NX-ID3443
Input refreshing with input changed time
only *
1
NX-ID3444
8 points
NPN
Switching Synchronous I/O refreshing and
Free-Run refreshing
20 μs max./400 μs max.
NX-ID4342
PNP NX-ID4442
16 points
NPN NX-ID5342
PNP NX-ID5442
DC Input Unit
(M3 Screw Terminal
Block, 30 mm
Width)
16 points
For both
NPN/PNP
24 VDC
Switching Synchronous I/O refreshing and
Free-Run refreshing
20 μs max./400 μs max. NX-ID5142-1
DC Input Unit
(MIL Connector, 30
mm Width)
16 points
For both
NPN/PNP
24 VDC
Switching Synchronous I/O refreshing and
Free-Run refreshing
20 μs max./400 μs max.
NX-ID5142-5
32 points NX-ID6142-5
DC Input Unit
(Fujitsu Connector,
30 mm Width)
32 points
For both
NPN/PNP
24 VDC
Switching Synchronous I/O refreshing and
Free-Run refreshing
20 μs max./400 μs max. NX-ID6142-6

Omron NX502-1 Series Specifications

General

Brand	Omron
Model	NX502-1 Series
Category	Controller
Language	English