Omron NX502-1 Series - System Configuration

1-3
System Configuration
System configuration is available on conditions that it must issue FINS commands received from ex-
ternal computers and OMRON CPU Units and receive FINS commands through the built-in
EtherNet/IP port of the NX-series CPU Unit.
Ethernet
FINS command
Built-in EtherNet/IP port
N
X-series CPU Unit
Or
CS/CJ/CP-series CPU Unit
NX-series CPU Unit
Computer software
1 FINS
1-4
NX-series CPU Unit FINS Function User's Manual (W596)