Omron R88D-KN10F-ECT-L User Manual

A - 159
Appendices
G5-series Linear Motors/Servo Drives With Built-in EtherCAT Communications
A-3 Sysmac Error Status Codes
A
A-3-2 Error Description
Event name External Encoder Overheating Warning Event code 0804 0000 hex
Description The external encoder temperature exceeded the specified value.
Source
EtherCAT Master Function Module
Source
details
Slave Detection
timing
Continuously
Error
attributes
Level
Observation
Recovery
–
Log category
System
Effects User program Continues. Operation Not affected.
Indicators
EtherNet/IP NET RUN EtherNet/IP NET ERR EtherNet/IP LINK/ACT
–––
System
-defined
variables
Variable Data type Name
None – –
Cause and
correction
Assumed cause Correction Prevention
The ambient temperature is too
high.
Remove the cause of external
encoder overheating.
Adjust the surrounding
environment so that the external
encoder does not overheat.
Linear Motor failed. Replace the Linear Motor. None
Attached
information
None
Precautions/
Remarks
“A5” is displayed on the front panel of the Servo Drive.
Event name Life Expectancy Warning Event code 0805 0000 hex
Description The remaining life of the capacitor or the fan is shorter than the specified value.
Source
EtherCAT Master Function Module
Source
details
Slave Detection
timing
Continuously
Error
attributes
Level
Observation
Recovery
–
Log category
System
Effects User program Continues. Operation Not affected.
Indicators
EtherNet/IP NET RUN EtherNet/IP NET ERR EtherNet/IP LINK/ACT
–––
System
-defined
variables
Variable Data type Name
None – –
Cause
and
correction
Assumed cause Correction Prevention
The life expectancy of the
capacitor or the fan is shorter than
the specified value.
Replace the Servo Drive. None
Attached
information
None
Precautions/
Remarks
“A7” is displayed on the front panel of the Servo Drive.

Omron R88D-KN10F-ECT-L Specifications

General

Brand	Omron
Model	R88D-KN10F-ECT-L
Category	Servo Drives
Language	English