Omron RC212 - Wrist Cuff Positioning Details; Cuff Placement and Clearance

15
2. Preparation
3. Position the wrist cuff leaving a clearance
of 0.5 inch (1 to 2 cm) between the cuff
and the bottom of your palm.
4. Wrap the wrist cuff firmly around your wrist.
Do not apply over clothing.
Check to make sure that there is no gap between your
wrist and the cuff.
Note
• Make sure the wrist cuff does not cover the
protruding part of the wrist bone on the outside of
your wrist.
0.5 inch
(1 to 2cm)