10
Battery Life & Replacement
If the battery low symbol ( ) appears on the display, replace all four
batteries at the same time.
Even if the battery low symbol ( ) starts to blink, you will still be able
to use the unit for a short while. However, you should replace the
batteries with new ones when the symbol remains lit.
• Turn the monitor off before replacing the batteries.
• Remove the batteries if the monitor will not be used for more than
3 months.
• If the batteries are removed for more than 30 seconds or so, the
Date/Time setting will need to be reset. See “Setting the Date and
Time” for details.
• Dispose of batteries according to applicable local regulations.
Four new “AA” manganese batteries will last for approximately 300
measurements, when used to take two measurements a day.
Since the supplied batteries are for monitoring use only, they may have a
shorter life and not last for 300 measurements.
HOW TO INSTALL/REPLACE THE BATTERIES
To Next Page
Loading...
