Omron SEM-2 - Maintenance and Storage Guidelines

Care and Maintenance
MAINTENANCE
To keep your digital blood pressure monitor in the best condition and
protect the unit from damage follow the directions listed below:
• Do not subject your monitor and cuff to extreme temperatures,
humidity, moisture or direct sunlight.
• Do not fold the cuff or tubing tightly.
• Do not inflate the monitor over 299 mmHg.
• Do not disassemble the monitor.
• Do not subject the monitor to strong shocks or vibrations (for example,
dropping the monitor on the floor).
• Do not use volatile liquids to clean the monitor. The monitor should be
cleaned with a soft, dry, cloth.
• Do not wash the arm cuff or immerse it in water.
MAINTENANCE AND STORAGE
24
EN-02-31[SEM-2]-3 8/23/05 8:58 AM Page 24