Omron STC-HD203 Series - Page 31

No. 13S054-10
STC-HD203DV / STC-HD203DV-CS / STC-HD203SDI / STC-HD203SDI-CS
Product Specifications and Users Guide
31/78
uCOM: Other
User Preset
Set the DSP setting from eight Preset0 to Preset7. All of DSP setting parameter may reflect after readout.
Digital Zoom
Set the Digital Zoom.
Digital zoom pan
Set the offset on horizontal direction.
Digital zoom tilt
Set the offset on vertical direction.
Set the OSD function, actual OSD control can be through remote controller.
Still image
Set the Still video image.
Test pattern selection
Set the test pattern on video output.