Need help?Do you have a question about the Omron Sti F3SJ-B N25-01T Series and is the answer not in the manual?
General| Series | F3SJ-B |
|---|---|
| Type | Safety Light Curtain |
| Model | N25-01T |
| Protected Height | 250 mm |
| Beam Pitch | 20 mm |
| Detection Capability | 14 mm |
| Response Time | 10 ms |
| Supply Voltage | 24 VDC |
| Operating Voltage | 24 VDC |
| Operating Temperature | -10 to 55 °C |
| Degree of Protection | IP65 |
| Output Type | PNP |
| Enclosure Rating | IP65 |
| Connection Type | M12 Connector |
| Housing Material | Aluminum |
| Storage Temperature | -25 to 60 °C |
Example wiring for auto reset mode with external test function.
Methods to prevent interference between multiple safety light curtains.
Guidelines for placing the sensor away from reflective surfaces.
Calculation method for the required safety distance.
Dimensional drawings for mounting brackets and unit.
Step-by-step instructions for mounting and aligning the light curtain.
Verification steps for correct installation before operation.
Verification steps for wiring integrity before applying power.
Verifying operational status when the machine is not running.
Regular inspection points for safe operation and operator changes.
Verifying safety function correctly stops machine operation.
To Next Page
