EasyManua.ls Logo

Omron Sti F3SJ-B P25-01TS Series - User Manual

Omron Sti F3SJ-B P25-01TS Series
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Safety Light Curtain
F3SJ-B□□□□P25-01TS Series
© OMRON Corporation 2017-2018 All Rights Reserved.
Original instructions
Quick Installation Manual
Relevant manual Cat. No.
Safty Light Curtain F3SJ-B-01TS User's Manual SCHG-734
3126800-6A
Question and Answer IconNeed help?

Do you have a question about the Omron Sti F3SJ-B P25-01TS Series and is the answer not in the manual?

Omron Sti F3SJ-B P25-01TS Series Specifications

General IconGeneral
TypeSafety Light Curtain
SeriesF3SJ-B
ModelP25-01TS
Number of Beams25
Beam Pitch25 mm
Detection Capability25 mm
Response Time14 ms
Operating Voltage24 VDC
Output TypePNP
Enclosure RatingIP65
Connection TypeCable
StandardsIEC 61496-1, IEC 61496-2

Summary

Introduction

What is Included

System Components

Light Curtain Setup Flow

Function Selection Flow Chart

Wiring Examples

5-1. EDM not used, auto reset mode, external test used

Wiring example for EDM off, auto reset, external test.

5-2. EDM used, auto reset mode, external test used

Wiring example for EDM on, auto reset, external test.

Mounting and Beam Alignment

6-1. Mutual Interference Prevention

Preventing interference when multiple light curtains are used.

6-2. Distance from Reflective Surfaces

Specifies distances from reflective surfaces to avoid interference.

6-3. Safety Distance

Guidance on calculating safety distance per ISO 13855.

6-5. Mounting and Beam Alignment

Steps for mounting intermediate and top/bottom brackets.

Pre-Operation Checklists; Maintenance Checklists

Checklists

Installation condition and wiring checks before power on.

Operation Check While the Machine Is Stopped

Procedures for checking operation when the machine is stopped.

Inspection at Startup and When Changing Operators

Checklists for initial startup and operator changes.

Checking that Hazardous Parts Stop While the Machine Operates

Verifying safety function during machine operation.

Maintenance Checklists

Checklists for routine maintenance and inspections.

Suitability for Use

Related product manuals