Standard Models Appendix A
66
• U: UL, C: CSA, N: NK
See Omron sales representatives concerning operating conditions
under which UL, CSA, and NK standards were met (Aug. 1988).
Peripheral Devices
Name Specifications Model number Standards
Programming Console Vertical, with backlight 3G2A5-PRO13-E U, C
Horizontal, with backlight 3G2A6-PRO15-E U, C
Hand-held, with backlight. The Programming Console
Adapter AP003 and connecting cable CN222/CN422 are
necessary. They are sold separately.
C200H-PR027-E U, C
Programming Console
Mounting Bracket
Used to attach Hand-held Programming Console to a
panel.
C200H-ATT01 ---
Programming Console
For C20P/C28P/C40P/C60P only 1 m 3G2C7-CN122 ---
Connecting Cables
50 cm 3G2C7-CN512 ---
For Hand-held Programming Console 2 m C200H-CN222 ---
4 m C200H-CN422 ---
Programming Console
Adapter
Required to use Hand-held Programming Console with
any PC but C200H, C20.
C500-AP003 ---
Cassette Recorder
Connecting Cable
Used to connect Programming Console, GPC, or
Cassette Deck Interface Unit to a cassette deck;
length: 1 m.
SCYPOR-PLG01 ---
PROM Writer Used for all P-type PCs. C500-PRW06 ---
Printer Interface Unit Interface for X-Y plotter or printer; System Memory
Cassette ordered separately.
3G2A5-PRT01-E ---
Printer Interface Unit
Memory Pack
When mounting to P-type CPUs C20-MP009-EV3
Printer Connecting Cable 2 m (also used for X-Y plotter) SCY-CN201 ---
Floppy Disk Interface Unit C20P/C28P/C40P. With comment file; able to connect to
NEC floppy disk controller
3G2C5-FDI03-E ---
Peripheral Interface Unit To connect GPC or FIT to P-type PCs 3G2C7-IP002-V2
Connecting Cable Used to connect FIT or GPC to Pe- 2 m 3G2A2-CN221 ---
ripheral Interface Unit and to connect
5 m C500-CN523
To Next Page
Loading...
Need help?
General
