Need help?Do you have a question about the Omron SYSMAC C40P and is the answer not in the manual?
General| Model | C40P |
|---|---|
| Type | Programmable Logic Controller (PLC) |
| Manufacturer | Omron |
| Series | SYSMAC |
| Number of Inputs | 24 |
| Number of Outputs | 16 |
| Operating Temperature | 0 to 55 °C |
| Humidity | 10 to 90% RH (non-condensing) |
| Input Voltage | 100-240V AC |
| Communication Ports | RS-232C |
| Programming Language | Ladder Diagram |
| Instruction Set | Basic and advanced instructions |
| Timer/Counter | Yes |
| Storage Temperature | -20 to 70 °C |
| I/O Capacity | 40 points (24 inputs, 16 outputs) |
Explains installation and setup, environment, mounting, cable, wiring, and switch settings.
Conditions for reliable P-type PC operation, including ambient temperature, humidity, and atmosphere.
Dimensions and mounting information for CPUs, Expansion I/O Units, Analog Timer Units, and I/O Link Units.
Proper wiring diagrams for CPUs and Expansion I/O Units with different power supply specifications.
I/O wiring diagrams for representative models, connection examples for sensors and switches.
Circuits for emergency stop and interlocks, and wiring of power supply systems to prevent malfunctions.
Procedures for setting CPU DIP switches and installing EPROM for proper PC operation.
Identifies abnormal system conditions and provides correction procedures for P-type PC malfunctions.
Guidelines for replacing fuses, relays, and other components to restore system operation quickly.
To Next Page