29
RFID System
User's Manual
Section 2 Tags
Section 2
Specifications and Performance
• Dimensions
V680-D1KP66T/66MT
V600-A86 Attachment
Tag Heat Resistivity
• Storing Tags under high temperatures will adversely affect the performance of the internal parts and
the service life of the Tags.
• An LTPD of 10% was determined during the evaluation for Tags that reached the end of their life after
testing under the following test conditions.
LTPD: Lot tolerance percent defective
The lower limit of the malfunction rate for lots to be considered unacceptable during reliability testing.
Heat cycle −10°C/+150°C, 30 minutes each for 1,000 cycles
−100°C/+180°C,30 minutes each for 200 cycles
High temperatures +150°C, 1,000 hours
+180°C, 200 hours
25
+0.2
25
+0.2
25
+0.2
25
+0.2
3.5
+0.1
Two, M3
Four, R3
Four, R4
32
32
34
34
Mounting Hole Dimensions
Two, 3.5 dia.
Two, 6 dia.
Case material PPS resin
25+0.2
25+0.2
25+0.2
25+0.2
16
4
10
3.5
37
37
34
34
15
15
Two, M3
Two, 4 dia.
Four, R5.5
Case material PPS resin
To Next Page
Loading...
