EasyManuals Logo

Omron X4 Smart User Manual

Omron X4 Smart
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
EN4
EN
3. Error Messages and Troubleshooting
If any of the below problems occur during measurement, check to make sure that no other electrical device is within 30 cm. If the problem persists,
please refer to the table below.
Display/Problem Possible Cause Solution
appears or the arm
cuff does not inflate.
The [START/STOP] button was pressed
while the arm cuff is not applied.
Press the [START/STOP] button again to turn the monitor off.
After inserting the air plug securely and applying the arm cuff
correctly, press the [START/STOP] button.
Air plug is not completely plugged into
the monitor.
Insert the air plug securely.
The arm cuff is not applied correctly. Apply the arm cuff correctly, then take another measurement.
Refer to section 7 of instruction manual
.
Air is leaking from the arm cuff. Replace the arm cuff to the new one. Refer to section 14 of
instruction manual
.
appears or a
measurement
cannot be
completed after the
arm cuff inflates.
You move or talk during a measurement
and the arm cuff does not inflate
sufficiently.
Remain still and do not talk during a measurement. If “E2”
appears repeatedly, inflate the arm cuff manually until the
systolic pressure is 30 to 40 mmHg above your previous
readings. Refer to section 13 of instruction manual
.
Due to the systolic pressure is above
210mmHg, a measurement cannot be
taken.
appears
The arm cuff is inflated exceeding the
maximum allowable pressure.
Do not touch the arm cuff and/or bend the air tube while taking
a measurement. If inflating the arm cuff manually, refer to
section 13 of instruction manual .
appears
You move or talk during a measurement.
Vibrations disrupt a measurement.
Remain still and do not talk during a measurement.
appears
The pulse rate is not detected correctly. Apply the arm cuff correctly, then take another measurement.
Refer to section 7 of instruction manual
. Remain still and sit
correctly during a measurement.
If the “
symbol continues to appear, we recommend you to
consult with your physician.
/ /
appears
does not flash during
a measurement.

Table of Contents

Other manuals for Omron X4 Smart

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Omron X4 Smart and is the answer not in the manual?

Omron X4 Smart Specifications

General IconGeneral
ModelX4 Smart
CategoryBlood Pressure Monitor
Device TypeUpper Arm Blood Pressure Monitor
ConnectivityBluetooth
Cuff Size22-42 cm
MemoryYes
Irregular Heartbeat DetectionYes
Clinically ValidatedYes
Intellisense TechnologyYes
Average Reading FunctionYes
Measurement MethodOscillometric
Measurement Range (Pressure)0-299 mmHg
CompatibilityOMRON connect app
Measurement Range (Pulse Rate)40-180 beats/min
Power SourceBattery
Power Supply4 x AA batteries

Related product manuals