14
4 Maintenance
Always disconnect your engraver from its power source before any adjustment, cleaning, or other maintenance of
these devices.
You can remove dust from these devices with a soft cloth. Do not use harsh chemicals or allow any electrical
components or connections to become wet. If they accidentally become wet, immediately use your engraver’s
emergency stop button, disconnect your engraver from its power source, and leave it disconnected until all
water has completely dried.
If there is ever a need to replace the provided microSD card, format it to use the FAT32 file system.
For maximum safety and best results, leave all other adjustment, maintenance, and repair to trained and skilled
professionals. If this control system is ever damaged or malfunctions during use, immediately use your engraver’s
emergency stop button, disconnect your engraver from its power source, and leave it disconnected until all damage
or malfunctioning equipment has been fully repaired or replaced.
Contact Us
Thank you for choosing our laser equipment for your home or shop! For a .pdf
copy of the latest version of this manual, use the appropriate app on your
smartphone or other device to scan the QR code to the right.
Come join the OMTech community at our official laser group on Facebook or
visit the company forums at omtechlaser.com! Check our YouTube channel for
helpful hints and instructional videos. If you encounter any problem regarding
your engraver, do not hesitate to contact customer service with your order
number at help@cs-supportpro.com or techsupport@omtechlaser.com. Our
teams will respond within 24 hours to make things right. You can also reach us
Monday to Friday at (949) 539-0458 between 8 am and 4:30 pm PST.
Thank you and we hope you will choose us again for all your laser needs!
To Next Page
Loading...
Need help?
General