EasyManuals Logo
Home>on networks>Wireless Router>N150RM

on networks N150RM User Manual

on networks N150RM
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
Modem Router Setup
35
N300 WiFi ADSL2+ Modem Router (N300RM)
The router usually detects and discards incoming traffic from the Internet that is not a
response to one of your local computers or a service that you have configured in the Port
Forwarding/Port Triggering screen. Instead of discarding this traffic, you can have the router
forward the traffic to one computer on your network. This computer is called the default DMZ
server.
To set up a default DMZ server:
1. On the WAN Setup screen, select the Default DMZ Server check box.
2. Type the IP address.
3. Click Apply.
Change the MTU Size
The maximum transmission unit (MTU) is the largest data packet a network device transmits.
When one network device communicates across the Internet with another, the data packets
travel through many devices along the way. If a device in the data path has a lower MTU
setting than the other devices, the data packets have to be split or “fragmented” to
accommodate the device with the smallest MTU.
The best MTU setting for On Networks equipment is often just the default value. In some
situations, changing the value fixes one problem but causes another. Leave the MTU
unchanged unless one of these situations occurs:
You have problems connecting to your ISP or other Internet service, and the technical
support of either the ISP or On Networks recommends changing the MTU setting. These
web-based applications might require an MTU change:
- A secure website that does not open or displays only part of a web page
- Yahoo email
- MSN portal
- America Online’s DSL service
You use VPN and have severe performance problems.
You used a program to optimize MTU for performance reasons, and now you have
connectivity or performance problems.
Note: An incorrect MTU setting can cause Internet communication
problems. For instance, you might not be able to access certain
websites, frames within websites, secure login pages, or FTP or
POP servers.
If you suspect an MTU problem, a common solution is to change the MTU to 1400. If you are
willing to experiment, you can gradually reduce the MTU from the maximum value of 1500

Table of Contents

Other manuals for on networks N150RM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the on networks N150RM and is the answer not in the manual?

on networks N150RM Specifications

General IconGeneral
Brandon networks
ModelN150RM
CategoryWireless Router
LanguageEnglish

Related product manuals