Modem Router Setup
42
N300 WiFi ADSL2+ Modem Router (N300RM)
QoS for a MAC Address
To create a QoS policy for traffic from a specific MAC address:
1. Select QoS Setup and click the Setup QoS Rule button.
The QoS Setup screen
displays.
2. Click Add Priority Rule.
3. From the Priority Category list, select MAC Address:
4. If the device is the MAC Device List, select its radio button. The information from the MAC
Device List populates the policy name, MAC Address, and Device Name fields. If the device
is not in the list, click Refresh. If it still does not appear, fill in these fields manually.
5. From the Priority list, select the priority for Internet access for this device’
s traffic relative to
other applications and traffic. The options are Low, Normal, High, and Highest.
6. Click Apply to save this rule to the QoS Policy list and return to the QoS Setup screen.
7. In the QoS Setup screen, select the T
urn Internet Access QoS On check box.
8. Click Apply.
Edit or Delete an Existing QoS Policy
To edit or delete a QoS policy:
1. Select QoS Setup to display the QoS Setup screen.
2. Select the radio button next to the QoS policy that you want to edit or delete, and do one of
the following:
• Click Delete to remove the QoS policy
.
• Click Edit to edit the QoS policy
. Follow the instructions in the preceding sections to
change the policy settings.
3. Click Apply in the QoS Setup screen to save your changes.
To Next Page
Loading...
Need help?
General
