Onan CCK Series Operator's Manual And Parts Catalog

CUSTOMER SERVICES
OWNER'S WARRANTY SERVICE -
ENGINE DRIVEN ELECTRIC GENERATOR SETS,
SEPARATE GENERATORS, INDUSTRIAL ENGINES
QUALITY OF PRODUCT
Onan products are engineered and designed to perforio as stated on product nameplate and published
specification. Only quality material and workmanship are used in the manufacture of this product. With
proper installation, regular maintenance and periodic repair service, the equipment will provide many
enjoyable hours of service.
GENERAL WARRANTY PRACTICES
All Onan-manufactured engine-driven electric generator sets, separate generators, and industrial engines
are sold with a full one-year warranty. This warranty is issued only to the original user and promises
that these products are free from defects in material or factory workmanship when properly installed,
serviced, and operated under normal conditions, according to the manufacturer’s instructions. The text
of the Onan published warranty appears in the Onan Operator’s Manual sent with the product.
Warranty Registrotian: A Warranty Registration card accomi^nies each Onan Product. This card must be
properly filled out and returned to the Onan Factory in order to qualify for warranty consideration as
covered in this bulletin. When requesting warranty repair work you must provide the pirchase date, Onan
model and serial number of the equipment.
Warranty Authariiation; Warranty service must be performed by Onan Factory or Onan Authorized Parts
and Service Centers or their Approved Service Dealer. A complete listing of Onan Authorized Parts and
Service Centers is provided in our brochure F*115, a copy of which is shipped with each Onan Product.
The company names which appear in bold face, capital letters, are the Onan Authorized Service Centers
responsible for handling parts, service and warranty adjustments of Onan Products. These organizations
have Onan factory-trained service personnel, parts stock, and the necessary facilities and tools for the
service and repair of Onan equipment. The company names which appear in bold face, small letters, are
Approved Service Dealers under the Onan Authorized Parts and Service Center. They have Onan factory-
trained personnel and also handle parts, service and warranty.
Material Allowancei: Onan will allow credit or furnish free of charge to the Onan Authorized Service
Station or his Approved Service Dealer, all genuine Onan parts used in a warranty repair of these products
which fail because of defective material or workmanship.
Labor Allowance: Onan will allow warranty repair credit to the Onan Authorized Parts and Service Center
and his Approved Dealer at straight time labor when the cause of failure is determined to be defective
material or factory workmanship. This labor allowance will be based on the factory's standard time sched¬
ule of published flat rate labor allowances, or, otherwise a time judged reasonable by the factory. Repair
work other than warranty will be charged to the owner. The Onan Division’s Warranty practice does not
provide for allowance of expenses such as start-up charges, communication charges, transportation
charges, travel time and/or mileage, unit removal or installation expense, cost of fuel, oil, normal mdln-
tenance adjustments, tune-up adjustments or parts maintenance items.
Administratian: Warranty of Onan Products is administered through Onan Authorized Parts and Service
Centers in whose territory the equipment is located. These Service Centers and their approved Onan Ser¬
vice Dealers are authmized to make settlement of all customer warranty claims within the limits of the
manufacturer’s warranty policy as described herein.
Onan reserves the right to change warranty practices without prior notice.

Onan CCK Series Specifications

General

Fuel Type	Gasoline
Fuel System	Carburetor
Frequency	60 Hz
RPM	1800 RPM
Starting System	Electric or Recoil
Starting Method	Electric or Recoil Start
Voltage	120/240V
Compression Ratio	6.5:1
Ignition System	Battery Ignition
Phase	Single-phase