Onan CCK Series Operator's Manual And Parts Catalog

MAINTENANCE
A Planned Preventive Maintenance Program is extremely important if you ate to receive efficient opera¬
tion and tong service life from your Onan unit. Neglecting routine maintenance can result in premature
failure or permanent damage to your equipment. The Onan Operator’s Manual sent with the product con¬
tains recommended maintenance schedules and procedures.
Maintenance is divided into two categories:
1. Operator Maintenance.performed by the operator.
2. Critical Maintenance.. performed only by qualiHed service personnel.
Regular maintenance will help you avoid sudden and costly repairs in the future. Adequate evidence of
this scheduled maintenance must be offered when applying for% warranty claim.
INSTALLATION
Installation is extremely important and all Onan Products should be installed in accordance with the
manufacturer’s recommendations. If the owner experiences any difficulty with such items as mounting,
ventilation, exhaust location, fuel lines, wiring, etc., he should immediately contact the company from
whom he purchased the equipment so that corrective action can be taken. Althou^ the Onan Authorized
Service Center or his Approved Service Dealer may be able to remedy certain installation difficulties,
such repair work is not considered Onan warranty and there will be a charge for this service.
Onan
Minneapolis, Minnesota S5432
MSS-22
Replaces 23B0S4
Rev. 12-1-69

Onan CCK Series Specifications

General

Fuel Type	Gasoline
Fuel System	Carburetor
Frequency	60 Hz
RPM	1800 RPM
Starting System	Electric or Recoil
Starting Method	Electric or Recoil Start
Voltage	120/240V
Compression Ratio	6.5:1
Ignition System	Battery Ignition
Phase	Single-phase