
Do you have a question about the Onan KY Series and is the answer not in the manual?
| Type | Portable Generator |
|---|---|
| Frequency | 60 Hz |
| Model | KY Series |
| Fuel Type | Gasoline |
| Voltage | 120V |
| Engine | Onan Engine (Specific engine model varies within the KY series) |
| Starting System | Recoil start |
| Weight | 150 lbs |
| Fuel Tank Capacity | 5 gallons |
| Run Time at 50% Load | 8 hours |
| Dimensions | Varies by model |
| Outlet Types | 120V |
General safety guidelines and warnings for operating the genset.
Warning about lethal voltage from the generator output.
Hazards associated with engine exhaust gases, including carbon monoxide.
Warnings regarding flammable and explosive fuel.
Risks of explosive gases emitted by batteries.
Hazards from moving parts causing severe injury or death.
Overview of the installation manual's purpose and content.
Applicable safety codes and standards for genset installation.
Specifications for the genset's support structure and mounting bolts.
Instructions for installing the genset below the vehicle floor.
Guidelines for constructing an above-floor compartment for the genset.
Requirements for air inlet/outlet openings and clearances within the compartment.
Details on tailpipe material, installation, and safe routing.
Procedures and warnings for connecting the gasoline fuel system.
Procedures and warnings for installing the LPG fuel system.
Connecting the genset's AC power output leads.
Recommended wiring practices and adherence to electrical codes.
How to safely connect the genset to vehicle utility power.
Procedures for reconnecting genset voltage settings.
How to connect remote start/stop switches and indicators.
Guidelines for battery compartment ventilation and isolation.
Proper sizing, routing, and connection of battery cables.
Pre-startup checklist for verifying installation correctness.
Steps and safety precautions for starting the genset.