Onan NH Series User Manual

SPECIAL PARTS SECTION
FOR
CONTRACTOR MODELS
Parts not listed in this section, refer to the standard
parts groups. Exception: Overhaul Kits do not apply.
GEAR COVER AND OIL BASE GROUP
REF.
NO.
PART
NO.
402-0379
QTY. PART
USED DESCRIPTION
4 Hardware Package, Mounting
(Excludes Mounting Bolt)
CRANKSHAFT, FLYWHEEL, CAMSHAFT AND PISTON GROUP
REF.
NO. .
PART
NO.
105-0317
QTY.
USED
2
526-0017
• 1
3
160-1080 1
4 160-1049 2
5
516-0172
2
6 110-1283
1
7 160-1051 1
8
518-0129 2
9
160-0791
1
10 516-0144 4
PART
DESCRIPTION
Camshaft (Includes Center
Pin and Spark Advance
Mechanism Pins)
Washer, Wheel Mounting
Flywheel
Weight Assembly, Timing
Control - Includes Pins
Pin, Groove (1-1/16") -
Timing Control
Cover, Timing Control
Spring, Timing Control
Ring, Timing Control
Retainer
Cam, Timing Control
Pin, Roll (7/16") Cam-
shaft and Timing Control
Cam
50

Onan NH Series Specifications

General

Frequency	60 Hz
Engine Type	4-Cycle
Fuel Type	Gasoline
Starting System	Electric
Voltage	120/240V
Noise Level	72 dB(A) at 7 meters
Fuel Consumption	0.5-1.0 gal/hr (gasoline)