6
(transport keys for DVDs, VCRs,
PVRs, DVRs) These keys operate the transport functions
(play, fast-forward, rewind, etc.) of your device. To prevent
accidental recording, the (RECORD) key must be pressed
twice to start recording.
In TV mode the
key activates Picture-In-Picture (if available
on your TV), and the key swaps between the main picture
and the Picture-In-Picture.
FORMAT This key provides you the (16:9) wide screen view
function (if available on your original remote).
Code Retrieval
The code retrieval feature allows you to nd out which code is
currently programmed for each device key. This is useful if you
used the Search Method to program a device key.
1. Press the device key once.
2. Press and hold down the SET key until the
(power) key
blinks twice (the key blinks once, then twice).
3. Press 9 9 0. The
(power) key blinks twice.
4. For the rst digit of your ve-digit code, press 1 and count
all the blinks. If there are no blinks, the digit is “0”.
5. For the second digit, press 2 and count all the blinks. If
there are no blinks, the digit is “0”.
6. For the third digit, press 3 and count all the blinks. If there
are no blinks, the digit is “0”.
7. For the fourth digit, press 4 and count all the blinks. If there
are no blinks, the digit is “0”.
8. For the fth digit, press 5 and count all the blinks. If there
are no blinks, the digit is “0”. Now you have your ve-digit
code.
Quick Code Reference
Device Type Code
To Next Page
Loading...
Need help?
General
