8
4. Press twice on the learned key which will be deleted (the
key blinks twice).
To delete a Shifted Learned feature, press SET before you
press the learned key to be deleted in this step.
5. If there is another learned function you wish to delete,
repeat steps 1–4.
6. The original functions of this remote will now be restored.
To delete all learned functions within a specific mode:
1. Press and hold down the SET key until the
(power) key
blinks twice (the key blinks once, then twice).
2. Press 9 7 6 (the
(power) key blinks twice).
3. Press the appropriate device (mode).
Operational Reset
The Operational Reset will erase all learned functions across all
modes and some other programmed functions like Macros.
1. Press and hold down the SET key until the
(power) key
blinks twice (the key blinks once, then twice).
2. Press 9 8 0 (the
(power) key blinks four times).
To Next Page
Loading...
Need help?
General
