9
Extra Features
Volume Punch Through
You may be able to use some functions of your Television,
Video recorder, DVD player, Amp./Tuner, Satellite receiver
or Cable converter at the same time. For example: if you are
watching a program on your video recorder, you can adjust the
volume (a TV function) without pressing the TV mode key on
this remote.
To punch through to TV volume while in the AUX, DVD/
VCR, AUDIO, or CBL/SAT (DTC) mode:
1. Press and hold down the SET key until the
(power) key
blinks twice (the key blinks once, then twice).
2. Press 9 9 3.
3. Then press the TV key and the
(power) key blinks twice.
To cancel “Volume Punch Through” for a single mode:
1. Press the device key for the mode you want to cancel
volume punch through. For example, to cancel volume
punch through for DVD/VCR mode, press the DVD/VCR key.
2. Press and hold down the SET key until the
(power) key
blinks twice (the key blinks once, then twice).
3. Press 9 9 3.
4. Then press the VOL– key and the
(power) key will blink
four times.
The Volume keys will now control the VOL+/– and MUTE
functions on the original device (not on the TV). For example,
if you canceled volume punch through for DVD/VCR mode, you
will be able to control VOL+/– or MUTE functions of your DVD
player or VCR (provided it has volume control).
To cancel “Volume Punch Through” for all modes:
1. Press and hold down the SET key until the
(power) key
blinks twice (the key blinks once, then twice).
2. Press 9 9 3.
3. Press the VOL+ key and the
(power) key will blink four
times.
To Next Page
Loading...
Need help?
General
