7
APP SHORTCUT KEYS
TIPS AND TRICKS
The remote also features 4 app shortcut keys, which will
give direct access to your favorite streaming apps, such as
Netix or Amazon Prime Video.
If your original remote control had keys to directly access
these services, these keys will act the same. But if not you
can program them to mimic a sequence of keys (a macro)
used to access the app.
To program the macro, you rst need to know the sequence
of keys you need to press to always bring up the service you
prefer. For example on an Apple TV, the sequence is Back (or
Home), Menu Down, Menu Right (until the app is selected)
and OK.
• To power on the devices in the Activity, press the
Activity key.
• To power o your devices, press the Power key.
• The remote will remember which devices are on or
o and which HDMI Input was last selected.
- This can go out of sync, for example if the original
remotes are used
- If you don’t see the picture or a device is not
powered on when it should be, press and hold the
AV sync key.
•
If you need help, the My Nevo app has a help section, just
scroll to the right from the main menu and select “Help”.
To program the Macro, go to the App Shortcut section in the
My Nevo app. You can program one macro per key.
AV SYNC
The Input key is used to manually select the HDMI Input of
your TV. If you press and release it you should see the Input
Selection screen of your TV. But it also has a secondary
function. After pressing the Activity key, if you nd that one
or more of the desired devices did not power on, or that the
TV is on the wrong HDMI Input, hold down this key for 2
seconds. The remote will then try to correct this for you, by
resending the appropriate Power and Input commands.
ENGLISH
To Next Page
Loading...
Need help?
General
