To Next Page

To Previous Page

PROGRAMMING DEVICE CONTROL

The One ForAll 4 Device Universal Remote Control is preprogrammed at

the factory to operate an RCA TV, a Toshiba DVD player,a Motorola cable

box,and an RCAVCR.To control devices other than the default brands,per-

form the following steps; otherwise skip this section:

1. Turn on a desired device (e.g.,VCR or DVD player) and,if

applicable, insert media (e.g.,cassette or disc).

NOTE: Please read steps 2 through 4 completely before proceeding.

Highlight or write down the codes and device you wish to program

before starting step 2.

2. On the remote control,pressa device key once (i.e.,VCR/PVR,

DVD,CBL/SAT,or TV).

NOTE: To program control of a VCR,PVR (or DVR),TV/VCR Combo,

or TV/VCR/DVD Player Combo press VCR/PVR once.After program-

ming a VCR Combo device,you will be able to control channel selec-

tion, volume,andVCR functions.

NOTE: To program control of a DVD Player, DVD Player/VCR

Combo, or TV/DVD Player Combo, press DVD once.After program-

ming a DVD Combo device, you will be able to control channel selec-

tion, volume,and DVD functions.

NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)

Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)

Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,

then release

SET.

4. Use the

Manufacturer’s Codes (starting on page 36) to

locate the type of device and brand name and then enter

the first four-digit code for your device.If performed cor-

rectly, the

LED will blink twice.

NOTE: If the LED did not blink twice,repeat steps 2 through4 and enter

the same code again.

5. Aim the remote control at the device and press POWER

once.The device should turn off.If it does not,repeat

steps 2 through 5,trying each code for your brand until

you find one that works.If it still doesn’t work,try

Searching For Your Code on next page.

NOTE: If the device does not have a POWER key, press PLAY.

6. Repeat steps 1 through 5 for each device you want to con-

trol. For future reference,write down each working device

code in the following boxes:

VCR/PVR Code:

Device Type:______________

DVD Code:

Device Type:______________

CBL/SAT Code:

Device Type:______________

TV Code:

Device Type:______________

URC4220 manual booklet:WALLB4P manual booklet 4/13/09 3:47 PM Page 8

Brand	One for All
Model	URC-4220
Category	Remote Control
Language	English

One for All URC-4220 User Guide

Table of Contents

Other manuals for One for All URC-4220

Questions and Answers:

One for All URC-4220 Specifications

Related product manuals