8 WWW.ONEFORALL.COM
Once you have Set-Up your ONE FOR ALL 3, you can blink back your
Set-up Code for future reference.
Example: to blink out your television code:
1. Press the TV key once.
2. Press and hold down MAGIC until the ONE FOR ALL
3 red light blinks twice (the red light will blink once
then twice).
3. Press 9 9 0. The red light will blink twice.
4. For the first digit of your four-digit code, press 1 and
count all the red blinks. If there are no blinks, the
digit is „0“.
5. For the second digit of your four-digit code, press 2
and count all the red blinks. If there are no blinks,
the digit is „0“.
6. For the third digit of your four-digit code, press 3
and count all the red blinks. If there are no blinks,
the digit is „0“.
7. For the fourth digit of your four-digit code, press 4
and count all the red blinks. If there are no blinks,
the digit is „0“. Now you have your four-digit
code.
Code blink out
(To find out which code is currently programmed)
- To blink back the code for your other devices, press the appropriate
device key during step 1.
Device Type
1 ……………………………………
2 ……………………………………
3 ……………………………………
■■ ■■ ■■ ■■
■■ ■■ ■■ ■■
■■ ■■ ■■ ■■
Quick Code Reference
Make sure you write down the codes for your devices in the
boxes below and in the battery compartment for future easy
reference.
To Next Page
Loading...
Need help?
General
