Need help?Do you have a question about the Onean Carver and is the answer not in the manual?
General| Battery Type | Lithium-ion |
|---|---|
| Voltage | 44.4 V |
| Charging Time | 2.5 hours |
| Power | 5 kW |
| Width | 70 cm |
| Thickness | 15 cm |
| Weight | 16.5 kg (without battery) |
| Battery Weight | 8 kg / 17.6 lbs |
| Top Speed | 30 km/h |
| Riding Time | 40 min |
| Max Rider Weight | 220 lbs |
| Recommended Use | Recreation |
Specifications and construction of the Carver board.
Technical specifications of the jet propulsion unit.
Information on the battery type, capacity, and the charger.
Features of the wireless remote and list of included accessories.
Instructions on how to install the fins securely.
Guide for attaching the safety leash and battery magnet.
Instructions for attaching footstraps for rider stability.
Details on battery transport, connection, disconnection, and charging procedures.
Procedure for synchronizing the wireless controller with the board.
How to set the maximum power output for the jet unit.
Adjusting controller sensitivity and selecting power delivery profiles.
Conditions and best practices for using the Carver board in various water conditions.
Pre-operation checks and preparations required before entering the water.
Recommended steps for initial operation, including startup and turning.
Procedures and precautions for safely exiting the water with the board.
Overall safety precautions, including recommended gear and environmental awareness.
Steps for cleaning and maintaining the Carver board after use.
Guidelines for handling, storing, and maintaining the battery pack.
Care instructions for cleaning and maintaining the wireless controller.
Detailed steps for unmounting and mounting the impeller for repair.
Procedure for replacing corroded battery power connectors.
To Next Page
