Wi-Fi Hotspot
When Wi-Fi Hotspot is turned on, your mobile
data will be shared and other devices can
connect on Wi-Fi. You can set the following
options to manage your Wi-Fi Hotspots:
⚫ Wi-Fi Hotspot name: The generated Wi-Fi
network signal name.
⚫ Security: There are 3 options: No password,
WPA2-Personal encryption, and WPA3-
Personal encryption
⚫ AP Band: Select 2.4 GHz or 5 GHz.
USB tethering
To share your device's mobile data or Wi-Fi
network with your computer via USB, follow the
steps below:
1. Connect your phone to your computer with a
USB cable
2. Select the USB connection method as USB
tethering in the control center.
* Some computers may need Android RNDIS
driver to be installed separately.
Bluetooth tethering
To share your device's mobile data or Wi-Fi
network with other devices by BLUETOOTH
tethering, follow the steps below.
To Next Page
Loading...
