31
Control solution testing
2. Press to display the APPLY CONTROL screen
3. Prepare and apply control solution
Shake the control solution vial and remove the cap.
Squeeze the vial to discard the rst drop, then wipe the tip
with a clean tissue or cloth.
Touch and hold a hanging drop of control solution to
the narrow channel in the top edge of the test strip.
Control solution should not be applied on top of the
test strip.
Apply drop here
NARROW CHANNEL
TOP EDGE
When the APPLY CONTROL screen
is displayed, you can be sure that
the test result will be correctly
recorded in the meter memory
as a control solution test.
Customer Care Freephone 0800 121 200 (UK) or 1800 535 676 (Ireland)
To Next Page
Loading...
