EasyManuals Logo

Onicon FT-3500 Quick Start Guide

Onicon FT-3500
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DOC-0006267 Rev.C
ON
I
CON
Flow and Energy Measurement
FT-3500 Transmitter
Quick Start Guide
FT-3500 Transmitter Quick Start Guide
11451 Belcher Road South • Largo, FL 33773 • USA • +1 (727) 447-6140
www.onicon.com • sales@onicon.com
ON
I
CON
Flow and Energy Measurement
Refer to the
meter tag for
ow sensor
installation
steps.
FLOW SIMULATION
1. To enter a ow simulation mode, select “Diagnostics” from the
main menu screen, then “User Test.”
2. Set User Test to “Enabled” and then set the simulated Flow Setting
to desired percentage of full scale.
WARNINGS, ALARMS, AND ERRORS
Does the main screen show an alarm message?
Active warnings, alarms, and errors can be found by selecting “Alerts” on the main menu screen. Please reference the
FT-3500 user manual for more information on these alerts.
CHECKING NETWORK STATUS
Network Diagnostics:
The user can verify their communication status via the Network
Diagnostics screen.
Comm Status:
Down: No trac has been seen in 60 seconds
Up, Active: Trac has been seen in the last 60 seconds, and the
meter is talking to the network.
Up, Inactive: Trac has been seen in the last 60 seconds, and
the meter is not talking to the network.
1/2” NPT Weathertight Conduit Adapters Strain Relief Cable Grips
MOUNTING INSTRUCTIONS
The mounting surface must be structurally sound and capable of withstanding a minimum weight of 40lbs (18kg). Use the
following screws for mounting: (4) Machine screws - HHMS .25-20 x 1.5”; (4) Wood screws - FHLS .25 x 1.5”; (4) Concrete
screws - HHCS .25 x 1.5”
CONNECTING SENSOR CABLE TO THE FT-3500 TRANSMITTER
When connecting the cable to the transmitter, feed one sensor cable (out of the three)
through the conduit adapter/ strain relief at a time. Once all three cables are through
the connector, tighten the internal/ strain relief cable grip.
Before getting started, ensure that the serial numbers located on the transmitter, remote
electronics enclosure, and cable all match.
Mounting
Hole
Mounting
Hole
Mounting
Hole
Mounting
Hole
Scan for Manual

Other manuals for Onicon FT-3500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onicon FT-3500 and is the answer not in the manual?

Onicon FT-3500 Specifications

General IconGeneral
BrandOnicon
ModelFT-3500
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals