Why is my Onida S09TRD-N4 Air Conditioner not cooling?
Your Onida Air Conditioner might not be cooling because the airflow paths are blocked. Remove any obstructions to ensure free airflow. Also, check if the unit is in fan mode and switch to COOL mode. Ensure that the selected temperature is lower than the room temperature. Finally, a dirty air filter can also cause this issue, so clean the air filter.
What to do if my Onida S09TRD-N4 doesn't start?
If your Onida Air Conditioner doesn't start, it could be due to a tripped MCB. Try resetting the MCB. Alternatively, the fuse might have burnt out, in which case you should replace the fuse wire.
General| Type | Split AC |
|---|---|
| Capacity | 0.75 Ton |
| Energy Rating | 3 Star |
| Compressor Type | Rotary |
| Cooling Capacity | 2600 W |
| Refrigerant | R32 |
| Warranty | 1 Year on Product, 5 Years on Compressor |
| Operating Voltage | 230 V |
| Noise Level (Outdoor Unit) | 50 dB |
| Copper Condenser Coil | Yes |
| Filter Type | Anti-Dust Filter |
| Auto Restart | Yes |
| Sleep Mode | Yes |
| Turbo Mode | Yes |
To Next Page
