Need help?Do you have a question about the Onkyo A-7090 and is the answer not in the manual?
General| Power Output | 100 W/ch (8 Ohm) |
|---|---|
| Frequency Response | 5 Hz - 100 kHz |
| Total Harmonic Distortion | 0.05% |
| Signal-to-Noise Ratio | 102 dB |
| Dimensions | 435 x 154 x 380 mm |
| Weight | 10.5 kg |
| Damping factor | 100 |
| Input sensitivity | 200 mV |
| Input Impedance | 47 kOhm |
| Speaker Impedance | 4 Ω - 16 Ω |
Details on power output, distortion, frequency response, and impedance.
Input sensitivity, distortion, frequency response, and signal-to-noise ratios for audio inputs.
Explanation of the servo operational amplifier circuit and its feedback loop.
Procedure for adjusting the idling current using a voltmeter and resistor.
Steps for adjusting the servo operational amplifier circuit's voltage.
To Next Page
