Need help?Do you have a question about the Onkyo A-7070 and is the answer not in the manual?
General| Power Output | 100 watts per channel into 8Ω (stereo) |
|---|---|
| Frequency Response | 10 Hz - 100 kHz |
| Total Harmonic Distortion | 0.008% |
| Input Sensitivity | 0.16mV (MC), 2.5mV (MM), 150mV (line) |
| Signal-to-Noise Ratio | 74dB (MC), 85dB (MM), 100dB (line) |
| Speaker Impedance | 4 - 16 ohms |
| Dimensions | 435 x 154 x 400 mm |
| Weight | 12.2 kg |
| Damping factor | 100 |
| Amplifier Type | Stereo Amplifier |
| Speaker load impedance | 4Ω to 16Ω |
| Input Impedance | 47 kΩ |
| Output Power | 100 watts per channel into 8Ω (stereo) |
Safety guidelines and warnings for operation and maintenance.
Instructions for changing the unit's power source voltage.
Detailed explanation of the A-7070's servo operational amplifier circuit.
Description of the circuit responsible for the power indicator LEDs.
List of parts corresponding to the exploded view diagram.
Parts list for the NAEQ-621 equalizer amplifier circuit board.
Parts list for the NASW-622 switch circuit board.
Parts list for the NAVR-624 volume control circuit board.
Parts list for the NAAF-625 preamp, power amp, and protection board.
Parts list for the NAME-627 output indicator driver circuit board.
Parts list for the NAPS-630 rectifier circuit board.
Parts list for the NASW-626 switch circuit board.
To Next Page
