Onkyo A-8690 - Specifications

A-8690
SPECIFICATIONS
Power Output:
Dynamic Power:
Total Harmonic Distortion:
Intermodulation Distortion:
Damping Factor:
Input Sensitivity/
Impedance:
Output Level/Impedance:
Phono Overload:
Tone Control:
(Vol-20 dB)
High Cut:
Frequency Response:
100 watts per channel, min RMS. at
8 ohms, both channels driven from
20°Hz to 20 kHz, with no more than
0.008% Total harmonic distorion.
310 watts 2 homs, 220 watts 4 ohms
0.008% at rated power
0.008% at 1 watt output
0.005% at rated power
100 at 8 ohms
Phono (MM): 2.5 mV/50 kohms
Phono (MC): = 160V/220 ohms
CD DIRECT: 150 mV/50 kohms
TUNER: 150 mV/50 kohms
Tape Play: 150 mV/50 kohms
VCR Play: 150 mV/50 kohms
VDP Play: 150 mV/S0 kohms
Tape Rec: 150 mV/1.5 kohms
(Phono)
Pre Out: 1 V/600 ohms
Phono (MM): 200 mV RMS. at
1 kHz,
0.015% THD.
CONTRABASS:+ 10/+20 dB
(Muting: OFF/ON)
at 20 Hz
BASS: +10 dB at 70 Hz
TREBLE: +8 dB at 20 kHz
6 kHz (6 dB/Octave) (TREBLE
min.)
CD, Tuner: 2-50,000 Hz
(+0, —1i dB)
PRECAUTIONS
1. Replacing the fuses
RIAA Deviation:
Signal to Noise
Ratio (IHF-A):
Muting (Vol — 20 dB):
D/A CONVERTER SECTION
Coaxial Input:
Output:
Optical Input:
Digital Sampling Frequency:
Frequency Response:
Total Harmonic Distortion:
Signal to Noise Ratio:
(IHF-A):
Dynamic Range
(IHF-A):
Max. Output Level:
GENERAL
Power Supply:
Dimensions:
Weight:
Phono (MM): =+0.3 dB, 20 Hz-
20 kHz
Phono (MM): 94 dB (5.0 mV
input)
Phono (MC): 75 dB (0.5 mV
input)
CD: 107 dB
-15 dB
0.5 Vp—p/75
0.5 Vp-p/750
32,44.1, 48 kHz
2-20,000 Hz+0.2 dB
0.0015% at 1 kHz
110 dB
103 dB
2V f.m.S.
European models AC220 V, 50 Hz
435 (W)x164 (H) 392 (D) mm
17-1/8" X 6-7/16" X 15-7/16"
14.5 kg, 32.0 lbs.
Specifications and features are subject to change without notice.
For continued protection against risk fire, replace only with same type and same rating fuse.
CIRCUIT NO. PART NO. DESCRIPTION
F922 252077 or 4A-SE-EAK Primary fuse
252077CC 4A-SE-EAK Primary fuse
bar