EasyManuals Logo

Onkyo A-9070 Specifications

Onkyo A-9070
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AMPLIFIER FEATURES
• 140 Watts per Channel at 4 Ohms, 20 Hz–20 kHz,
0.05%, 2 Channels Driven, FTC
• AWRAT (Advanced Wide Range Amplifier
Technology)
• DIDRC (Dynamic Intermodulation Distortion
Reduction Circuitry)
• Parallel Push-Pull Amplification Design with Three-
Stage Inverted Darlington Circuitry
• 192 kHz/24-Bit HD Audio Playback via Coaxial
Inputs
• New Circuit Board Construction with Internal
Struts to Reduce Vibration
• Symmetrical Layout of L/R Channels
• Separate Wolfson
®
192 kHz/24-Bit DACs
(WM8742 x 2) for L/R Channels
• Four Large 15,000 µF Capacitors
• 0.05˝ (1.2 mm)-Thick Copper Bus Plate for Perfect
Grounding
• Four Amplifier Modes (Integrated Amp, Power Amp,
Pre-Amp, Split Pre-Amp/Power Amp)
OTHER FEATURES
• 3 Digital Audio Inputs (1 Optical and 2 Coaxial)
• 3 Analog Audio Inputs and 1 Output
• Main-In Terminal
• Independent Headphone Amplifier
• Discrete Phono Equalizer (MM/MC)
• Speaker A/B Drive
Audio L/R Pre-Out
• Customized, Gold-Plated, Banana Plug-Compatible
Speaker Posts
• Machined, Gold-Plated RCA and Phono Terminals
Auto Standby Function
Power and Clarity in One Sophisticated Device
Onkyo has declared war on distortion. The success of its campaign against noise is evident the moment you
switch on the A-9070 Integrated Stereo Amplifier. New DIDRC (Dynamic Intermodulation Distortion Reduction
Circuitry) dampens super high frequency distortion. Closed ground-loop circuits, HICC (High Instantaneous-
Current Capability), and vibration-damping construction combine to produce a startlingly pure sound across a
wide dynamic range. The unit’s four 15,000 µF capacitors keep plenty of power at the ready. Efficient parallel
push-pull amplification paired with three-stage inverted Darlington circuitry works at reducing distortion to
almost nil. Separate Wolfson
®
192 kHz/24-bit DACs for both left and right channels improve performance. The
unit is also equipped with 192 kHz/24-bit HD audio playback to handle modern formats. Four discrete amplifier
modesintegrated amp, power amp, pre-amp, and split pre-amp/power ampoffer flexibility when integrating
other hi-fi components. Details like an independent headphone amplifier, a phonograph equalizer, three digital
audio inputs, four analog inputs, and gold-plated audio terminals/speaker posts speak of the highest build quality.
The superb craftsmanship, technological refinement, and attention to detail invested in the A-9070 make it worthy
of serious consideration for those in the market for top-shelf hi-fi gear.
A-9070
INTEGRATED STEREO AMPLIFIER
BLACK
2011 NEW PRODUCT RELEASE
A-9070_US_A-9070 11/09/12 15:05 ページ 1

Other manuals for Onkyo A-9070

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo A-9070 and is the answer not in the manual?

Onkyo A-9070 Specifications

General IconGeneral
Damping factor130
Amplifier class-
Input sensitivity150 mV
Audio output channels2.0 channels
Peak power per channel140 W
Signal-to-Noise Ratio (SNR)107 dB
Total Harmonic Distortion (THD)0.006 %
Dynamic power per channel (3 Ohm)230 W
Dynamic power per channel (4 Ohm)180 W
Dynamic power per channel (8 Ohm)100 W
AC (power) inYes
Headphone connectivity6.3 mm
Speakers connectivity typeRCA
PurposeHome
Product colorBlack
Volume controlRotary
Cables includedAC
Connectivity technologyWired
AC input voltage230 V
AC input frequency50 Hz
Power consumption (typical)290 W
Weight and Dimensions IconWeight and Dimensions
Depth431 mm
Width435 mm
Height174.5 mm
Weight18100 g

Related product manuals